If you have an Arctic Sub Ohm Tank and a temperature sensing mod, these are the coils you're looking for. Each coil is made with Ni200, the standard grade of nickel used for temperature control. They are wicked with 100% Japanese organic cotton, which ensures that you only taste your liquid and not the coil.
These Arctic coils come in at 0.2 ohms, a resistance high enough to be read on every temperature control device on the market. They work from 212-572°F (or 100-300°C) and it is recommended that you run them from 20-80 watts/joules (for the purposes of vaping, watts and joules operate the same way).
For those of you trying out temperature control for the first time, we recommend that you start at a low temperature and work your way up. 300°F is generally a good place to start and then you can advance until you find your preferred temperature. Also know that no matter what wattage/joules you set your device to, you will still reach your set temperature. More watts/joules only affects the ramp up time it takes to hit that temperature (80watts/joules will hit 400°F much faster than, say, 20 watts/joules).
Please note that you should never use nickel coils in standard wattage mode. Nickel is only meant to be used with temperature control and is dangerous if used on a standard mod (or in the wattage mode of your temperature control device).
|Name||Arctic Temperature Control (5 Pack)|
|Resistance (ohm)||0.2 ohm|
By entering this website, you agree that you're of legal age in your state to purchase electronic cigarette products.
Falsifying your age for the purpose of purchasing products from this web site is illegal and punishable by law!